Special playback, Rental playback, Auto repeat playback – Sylvania 3819LC User Manual
Page 20: Make sure
SPECIAL PLAYBACK
Make sure ...
●
Use the remote control for this procedure.
●
TV/VCR power must be turned on.
●
Insert a prerecorded tape.
●
Before playback, follow steps below.
RENTAL PLAYBACK
This function enables you to improve the picture quality
when playing back worn cassettes such as rented tapes.
1
Select "USER’S SET UP"
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to "USER’S SET
UP".
Then, press the F.FWD/
B button.
2
Set "RENTAL" to [ON]
Press the PLAY/▲ or STOP/▼
button to point to "RENTAL".
Press the F.FWD/
B or REW/s
button until [ON] appears.
3
Exit the Rental setting
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY
B" appears.
●
Once you select the Rental mode, it stays in effect
even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/
B or REW/s button. Press the MENU button
to return to TV mode.
If there is a power failure of any kind, the unit will
retain its’ memory for this feature.
AUTO REPEAT PLAYBACK
The TV/VCR has the auto repeat function that allows
you to repeat a tape indefinitely without touching the
PLAY button.
ALL REPEAT:
Repeat playback from the beginning to
the end of the tape.
BLANK REPEAT:
Repeat playback from the beginning
to a blank part, which is blank for more than 10
seconds.
NOTE: All buttons except the POWER and STOP
buttons do not work during Repeat Playback. Always
set the Repeat Playback to [OFF] when not using this
function.
1
Select "USER’S SET UP"
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to "USER’S SET
UP".
Then, press the F.FWD/
B button.
2
Select "ALL" or "BLANK"
Press the PLAY/▲ or STOP/▼ button to point to
"REPEAT PLAY".
Press the F.FWD/
B or REW/s
button repeatedly until your
desired selection [ALL] or
[BLANK] appears.
3
Exit the Repeat Play setting
Press the MENU button to return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY
B" appears.
●
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/VCR.
●
If the Rental mode is set [ON], the "RENTAL
PLAY
B" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
F.FWD/
B or REW/s button. Press the MENU button
to return to TV mode.
If there is a power failure of any kind, the unit will
retain its’ memory for this feature.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
– USER’S SET UP –
RENTAL
[OFF]
B
REPEAT PLAY
[ALL]
AUTO RETURN
[OFF]
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
– USER’S SET UP –
B
RENTAL
[ON]
REPEAT PLAY
[OFF]
AUTO RETURN
[OFF]
7L26
B7916-03
- 20 -
EN