Sylvania 3819LC - Manual (Page 22)

RECORDING
Make sure ...
● TV/VCR power must be turned on.
● Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
NORMAL RECORDING
You can ONLY watch the same TV program that is
being recorded.
1
Select the channel to be
recorded
Press the number buttons on the
remote control or the
CHANNEL ▼ or ▲ button.
Remember: If the TV/VCR is connected to a cable box
or satellite box, the TV/VCR must be on CH3 or CH4,
then the channel to be recorded must be selected on the
cable box or satellite box.
2
Select the tape speed
Press the SPEED button to select
the desired tape speed (SP/LP/
SLP).
3 Begin recording
Press the RECORD button.
4
Stop recording
Press the STOP button when recording is completed.
SKIPPING UNWANTED
SCENES DURING RECORDING
Press the PAUSE/STILL button
to temporarily stop recording.
Press the PAUSE/STILL or
RECORD button to resume
recording.
NOTES:
● After five minutes, the TV/VCR will automatically
switch to the Recording mode to prevent tape damage.
● If "CLOSED CAPTION (ON)" is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.
REC
SP
PAUSE
SP
CH 10
SP
7L26
B7916-03
- 22 - EN