Sylvania 3819LC - Manual (Page 24)

TIMER
AUTOMATIC TIMER
RECORDING
You may set the TV/VCR to start and end a recording
while you are away. You can set 8 programs to record
on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: MAY 6th, 1998
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED: LP
Make sure ...
● Use the remote control for this procedure.
● If a cable box or satellite box is connected with the
TV/VCR you will be limited to record only one
channel. And the channel selector on the TV/VCR
must be selected to the output channel of the boxes
CH 3 or CH 4 and then the actual channel to be re-
corded must be selected on the boxes.
● Clock must be set to the correct time and date before
setting the timer.
● TV/VCR power must be turn on to program it.
● Insert a cassette tape with its erase prevention tab in
place. (If necessary, rewind or fast forward the tape
to the point at which you want to begin recording.)
● The channel you want to record is properly set in
advance. (See page 13)
Avoid over lap of programs ...
There is a chance that a program will not be performed.
when programs overlap;
● The program with an earlier start has priority.
● Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
● The illustration below demonstrates the sequence of
recordings.
Program 1
10:00AM - 11:00AM
Program 2 9:00AM - 10:00AM
Program 3 9:30AM - 12:00PM
1
Select "TIMER PROGRAMMING"
Press the MENU button.
Confirm "TIMER PROGRAMMING" is pointed by
pressing the PLAY/
K button.
And press the F.FWD/
B button.
● If you have not yet set the
clock, "MANUAL CLOCK
SET" appears. If so, follow
stops [3] to [8] on page 15.
Then set the timer recording.
2
Select your desired program number (1~8)
Press the PLAY/▲ or STOP/▼
button to select the desired program.
Then, press the F.FWD/
B button.
3
Set the channel number
Press the PLAY/▲ or STOP/▼
button until the desired channel
number appears.
(Example: CH61)
Then, press the F.FWD/
B button.
Remember: If the TV/VCR is connected to a cable box
or satellite box, the TV/VCR must be on CH3 or CH4,
then the channel to be recorded is selected on the cable
box or satellite box.
4 Select once, every day or weekly recording
For once recording :
Press the PLAY/▲ (up) button
until the desired date appears.
(Example: "5/06" for May
6th). Then, press the
F.FWD/
B button.
For every day recording : To record a TV program at
the same time on the same channel every day. (Example:
Monday through Sunday)
Press the STOP/▼ (down)
button until "EVRY DAY"
appears.
Then, press the F.FWD/
B
button.
For weekly recording : To record a TV program at the
same time on the same channel every week. (Example:
every Monday)
Press the STOP/▼ (down)
button until "EVRY" and
your desired day of the week
appear together.
Then, press the F.FWD/
B
button.
– M E N U –
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
TIME SEARCH
:00AM 10:00AM 1:00PM
Program 1
10:00AM11:00AM
Program
:00AM11:00AM
Program
:0AM1:00PM
11:00AM
Recording Seuence
Recording period is SHAE
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 EVRY DAY –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 EVRY MON –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
7L26
B7916-03
- 24 - EN