Sylvania 3819LC - Manual (Page 21)

SEARCH
Make sure ...
● Use the remote control for this procedure.
● TV/VCR power must be turned on.
● Insert a tape.
ZERO RETURN
This function can search easily a beginning point that
you want to review by rewinding or fast forwarding.
NOTE:
Zero Return WILL NOT work on a blank tape or a
blank portion of a tape.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point
at which you want to review.
2
Reset the counter to 0:00:00
Press the COUNTER RESET button repeatedly.
3
Begin recording or playback
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
4
To activate "ZERO RETURN" mode
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to "ZERO RE-
TURN".
Then, press the F.FWD/
B
button.
The counter will appear on the
TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.
TIME SEARCH
The Time Search function makes it possible to quickly
advance the tape to your desired position simply by
entering the exact amount of playback time you want to
skip.
NOTES:
● Time Search can be set up to a maximum of 9 hours
50 minutes (9:50) by 10 minutes at a time .
● This function will not operate in recording mode.
● This function is not operative when a cassette tape is
not inserted in the TV/VCR.
In the example below: To watch a program after 2 hour
50 minutes from the present position, in either direction.
1 Insert a tape.
2
Select "TIME SEARCH" mode
Press the TIME SEARCH button (with each push it will
increase by 10 minute)
OR
Press the MENU button.
Press the PLAY/▲ or STOP/▼
button to point to "TIME
SEARCH".
Then, press the F.FWD/
B button.
3
Enter your desired time
Press the PLAY/▲ or STOP/▼
button until your desired time
appears. (Example: "2:50"
stands for 2 hours 50 minutes)
If you wish to cancel the Time Search at this point, press
the MENU button.
4
Begin Time Search
By pressing the REW or F.FWD button, the TV/VCR
will rewind or fast forward to the specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL THE TIME SEARCH at this
point
Press the STOP/EJECT button on the TV/VCR or the
remote control. This will delete the selected time.
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
ZERO RETURN
B TIME SEARCH
TIME SEARCH
2 : 5 0
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
LANGUAGE [ENGLISH]
CAPTION [CAPTION1]
B ZERO RETURN
TIME SEARCH
7L26
B7916-03
- 21 - EN