Sylvania 3819LC - Manual (Page 25)

5 Set beginning hour
Press the PLAY/▲ or STOP/▼
button until the desired hour
appears. (Example: " 7, PM" for
7:30PM)
Then, press the F.FWD/
B button.
6
Set beginning minute
Press the PLAY/▲ or STOP/▼
button until the desired minute
appears. (Example: "30" for
7:30PM)
Then, press the F.FWD/
B button.
7 Set end hour
Press the PLAY/▲ or STOP/▼
button until the desired hour
appears. (Example: "8, PM" for
8:50PM)
Then, press the F.FWD/
B button.
8
Set end minute
Press the PLAY/▲ or STOP/▼
button until the desired minute
appears. (Example: "50" for
8:50PM)
Then, press the F.FWD/
B button.
9
Set the tape speed
Press the PLAY/▲ or STOP/▼
button until the desired tape
speed appears. (Example: LP)
10 Finish setting the program
Press the F.FWD/
B or REW/s button. Program 4 is
now completed.
● To set another program, repeat steps [2] to [10].
● Press the MENU button to return to original mode.
11 Set the timer
Press the POWER button to set automatic timer
recording. The TIMER REC indicator lights up.
● You must turn off the TV/VCR to activate automatic
timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV screen 2 minutes before the programmed start
time.
TO CORRECT A PROGRAM
● While setting a program; press the REW/
s button
to go back one step and enter the correct numbers
using the PLAY/▲ or STOP/▼ button.
● After setting a program;
1) Press the POWER button.
2) Repeat steps [1] - [2].
3) Press the F.FWD/
B button (or press the REW/s
button to go back one step) until the part you want
to correct begins flashing, then make the changes
pressing the PLAY/
K or STOP/L button.
4) Press the POWER button to set automatic timer
recording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
● After setting a program;
1) Press the POWER button.
2) Repeat steps [1] ~ [2] and select a program you
want to cancel.
3) Press the T-PROG. CLEAR button.
4) Press the MENU button to return to TV mode.
● While recording is in progress;
1) Press POWER button.
2) Press the STOP/EJECT button on the TV/VCR.
If you press the POWER button to turn off before the
end time, timer recording will continue to function.
Repeat steps [1] ~ [2], select a program you want to
cancel and press the T-PROG. CLEAR button. Press
the MENU button to return to TV mode.
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED 7:12 P M –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED 7:30 P
M –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED 7:30 P M 8:30 P M – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED 7:30 P M 8:50 P M – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– TIMER PROGRAMMING –
CH DATE BEGIN END
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
B61 5/06 WED 7:30 P M 8:50 P M LP
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
– – –/– – – – – –:– – –:– – – –
7L26
B7916-03
- 25 - EN