Omega RD260A - Manual (Page 11)

1 - 3
1. BEFORE INSTALLATION
1.2 Checking and Unpacking
CAUTION
1.2.2 Removing Packings
The internal assembly is secured in position by packings to safeguard against damages
during transit. When you unpack the recorder, remove the packings referring to the
following.
(1) Remove the lock screw securing the interior of the recorder during transit.
(2) Open the front door, and open the display by pulling its left end after removing the
adhesive tape.
(3) Remove all packings.
Removing Lock Screw and Packings for Transit
Pen model
Lock screw
Packing material
Display
Dot-printing model
Lock screw
Display
Packing material
Please take care not to apply any undue pressure in an upward or downward
direction to the display. This might cause a strain on the hinges.