Omega RD260A - Manual (Page 49)

5 - 5
5. DATA SETTING GUIDES
5.1 Various Modes
5.1.3 SET UP Mode
The SET UP mode can be entered by turning on the power while holding down the
[CH UP] (
ENT) key.
(Alarm hysteresis)
(A/D integration time, Pen model)
(Energizing/de-energizing)
(TC burnout ON/OFF)
(Upscale/downscale TC burnout)
(Pen offset compesation, Pen model, option)
(Setting of filter—Pen model)
(Alarm printout)
(Periodic print)
to next page
Channel No.
(Setting of moving average—Dot-printing model)
(On/off of offset settings protection)
Channel No.
(Setting of color of dots—Dot-printing model)
Channel No.