Optibase MGW 2000e - Manual (Page 15)

MGW 2000e Quick Start Guide
9
To display TCP/IP settings:
1. To display MGW 2000e’s TCP/IP settings, re-open the
HyperTerminal connection and log on again as
Administrator, the Main menu appears.
2. Type 3 (Display TCP/IP Settings); the TCP/IP settings
are displayed.
3. To return to the Main menu, press any key.
To log off MGW 2000e:
1. In the Main menu, press 0 (Quit); you are notified that
MGW 2000e will have to restart for the new settings to
take effect.
2. Press any key; the connection is terminated and MGW
2000e restarts, which may take several minutes. MGW
2000e is available again when the Power LED turns green.
If you wish to log on again:
• Re-open the HyperTerminal connection and enter the user
name and password for Administrator; the Main menu
appears.