Optibase MGW 2000e - Manual (Page 7)

MGW 2000e Overview
MGW 2000e transmits multiple channels of live TV and video
over IP networks. It can receive up to six live analog signals,
encode them in real-time to MPEG-1 or MPEG-2 and then
stream them over an IP network in multicast or unicast mode.
With MGW 2000e, organizations can utilize their IP networks
for business TV, training and corporate communications.
MGW 2000e encodes, multiplexes and transmits up to 6 live
MPEG-2 and MPEG-1 streams.
A Web-based remotely controlled management application lets
you configure, control and operate multiple streams.
MGW 2000e ships with two network interface cards (NIC)
enabling you to transmit streams over one NIC and use the
second one to configure and operate MGW 2000e.
This guide instructs you on how to connect MGW 2000e to a
network and initialize for the first use. It also guides you in
encoding one live channel from an analog or digital source with
pre-set default parameters.
Detailed instructions on setting streaming and encoding
parameters can be found in the user manual.