Optibase MGW 2000e - Manual (Page 3)

Safety Instructions
Use the following safety guidelines to help protect your MGW
2000e unit from potential damage and to ensure your own
personal safety.
When using MGW 2000e
As you operate MGW 2000e, observe the following safety
guidelines
Note
Do not open the MGW 2000e unit, as this will void your warranty. MGW
2000e does not contain any user serviceable parts.
• Before installing MGW 2000e, unplug the system to help
prevent electric shock or system board damage. Certain
system board components continue to receive power any
time MGW 2000e is connected to AC power.
• To help prevent electric shock, plug the power cable into
properly grounded sources. Use only properly grounded
extensions and adaptors as the need arises.
• Use only a UL Recognized power cord.
• Make sure nothing rests on your MGW 2000e power cable
and that the cables are not located where they can be
stepped or tripped over.
• Do not spill food or liquids on your MGW 2000e unit.
• Do not push any objects into free slots of your MGW 2000e
unit. Doing so will damage your MGW 2000e unit and can
cause fire or electrical shock by shorting out interior
components.