Optibase MGW 2000e - Manual (Page 18)

MGW 2000e Quick Start Guide
12
Configuring Source Parameters
1. Click the Source tab; the Source page appears.
2. Under Video Input, choose the video source connected to
the relevant encoding module and click Apply.
3. If you use an analog audio source, set Audio Input to
Unbalanced and click Apply.
If you have an MGE-200D encoding module installed and
use a digital audio source, set Audio Input to Digital
Audio and click Apply.
4. The other parameters are pre-set to default values and
don’t have to be adjusted. For detailed instructions and
explanations on setting other parameters, refer to the user
manual.
5. To return to the Channels list, click Channels in MGW
2000e Director's menu.
For a detailed description of the source parameters, refer to the
user manual.
Note
If you want to choose SDI as video input, you have to encode from a digital
video source and install an MGE-200D encoding module. For instructions on
installing encoding modules and connecting peripherals, refer to the user
manual.