Optibase MGW 2000e - Manual (Page 19)

MGW 2000e Quick Start Guide
13
Configuring a UDP Target
1. Click the Target tab; the Target page appears.
2. Select a UDP Target; UDP appears under Target Type.
3. Click Add Target; a default Multicast address is assigned
and default parameters are set.
• Confirm that your receiving PC belongs to the displayed
Multicast address, otherwise you won't be able to play the
stream.
• Refer to your network administrator to obtain a valid
Multicast address and enter it into the Target Address field.
4. To implement the settings, click Apply.
5. To return to the Channels list, click Channels in MGW
2000e Director’s menu.
For a detailed description of target parameters and instructions
on adding and configuring targets other than UDP, refer to the
user manual.