Optibase MGW 2000e - Manual (Page 22)

MGW 2000e Quick Start Guide
16
Hardware Overview
LEDs Description
Power Off
Blinks green
Green
No power
MGW 2000e is booting
Power on
Alarm Off
Blinks red
No error
At least one fan runs too slow
or failed
Ethernet Link Off
Orange No connection
Connected
Ethernet Transmit Off
Flashes green No transmission
Transmitting
(Channel) 1-6 Off Empty slot
Blinks red (if module is
inserted) MGW 2000e is booting.
Slot error (software not
loaded)
Green Encoding module inserted
and ready to encode
Blinks green Encoding
Red Encoding module inserted,
channel error
Certain errors may cause this
LED to flash.
Table 3: MGW 2000e Front Panel LEDs