Optibase MGW 2000e - Manual (Page 9)

MGW 2000e Quick Start Guide
3
Getting Started
This section describes how to unpack and initialize MGW
2000e. It instructs you on encoding and transmitting a UDP
stream under default conditions by using one encoding module
and MGW 2000e Director.
For instructions on encoding and transmitting RTP streams,
refer to the user manual.
Unpacking MGW 2000e
1. Choose a dry location for MGW 2000e, which complies
with the requirements regarding temperature specified in
the user manual.
2. Unpack MGW 2000e and its components carefully and
make sure that you have all the required components
available.
3. Desk-mount or rack-mount MGW 2000e.
Power Supply
MGW 2000e operates at 90/260V AC. The power cord connects
to the power connector on MGW 2000e’s rear panel. MGW
2000e recognizes your local voltage automatically.
MGW 2000e does not ship with a power cord. You will have to
purchase a power cord that fits your local DIN socket.