Optibase MGW 2000e - Manual (Page 17)

MGW 2000e Quick Start Guide
11
Configuring a Live Channel
To access the Channels page, choose Channels in MGW 2000e
Director’s menu.
The Channels page displays a list of the available live channels
corresponding to the number of encoding modules installed in
the MGW 2000e chassis.
You have to configure the stream, source and target parameters
for the live channel. This section instructs you on how to
configure the required parameters.
Configuring Stream Parameters
1. Under Control, click Properties ; the Properties page
appears displaying stream parameters.
2. Set Color System to Auto Detect and click Apply.
3. MGW 2000e detects the color system of your video source
automatically.
4. Other parameters are set to default values and don’t have to
be adjusted. For detailed instructions and explanations on
how to set the other parameters, refer to the user manual.
5. To return to the Channels list, click Channels in MGW
2000e Director’s menu.
For a detailed description of the stream parameters, refer to the
user manual.
Note
• MGE-100 encoding modules only support MPEG-1 settings. You will not
be able to set MPEG-2 parameters for channels associated with MGE-
100 encoding modules.
• If you are logged on as MGW2000Guest, the Properties button does
not show.