Oricom UHF200 - Manual (Page 10)

10
Installation
INSTALLATION
CAUTION
When installing your radio in your vehicle, check that during installation you do
not damage any wiring or vehicle components that may be hidden around the
mounting position.
If you are unsure about how to install your radio, we suggest for optimum
performance you have your radio professionally installed by a UHF specialist or
Auto electrician. When installing the radio, avoid mounting it close to heaters or
air conditioners.
Do not press the PTT or CALL button before installing the
antenna.
Screw the mounting bracket and the remote head bracket to firm surfaces.
To install the Radio;
1. Fix the radio bracket in a suitable location.
2. Then fix the radio in the bracket using the thumb screws.
Note
The radio contains a built-in loud speaker, The radio can be installed ‘out of the
way’ and an external speaker can be used as an alternative (not supplied).
To mount the Remote Head (UHF100)
The remote head is supplied with a slim mounting bracket and thumb screws.
Its small size and light weight design allows it to be mounted in almost any
convenient position accessible to the driver.