Oricom UHF200 - Manual (Page 27)

27
Operations
If you transmit on CH01 duplex mode, you are actually transmitting on CH31 the
repeater station down converts your signal and retransmits on CH01.
Your UHF100 and UHF200 allows you to pre-select Duplex operation individually
on each channel.
Push and hold the
F/DPX button for 2 seconds, "DPXON" should appear on the
LCD.
Push
F/DPX button to toggle the Duplex function On and Off.
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS
when transmitting
Key Lock
Push and hold the
PRI/LO button for 2 seconds to lock all buttons except for
the buttons below.
(volume up and down, Power On/Off, Monitor,
F/DPX, Push to talk ).
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS