Oricom UHF200 - Manual (Page 15)

15
Operations
200RX
CH
200RX
CH
blinking
Tri Function buttons
To use the primary function ( F, SC, PRI, ID, MO) press the required button.
To use the secondary function ( DPX, MEM, LO, CAL, TSQ) press and hold the
button for 2 seconds.
To use the third function (
OS/GS, ALPHA, QUIET, MENU), press F/DPX and
press the required button.
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS
Transmitting
NOTE: Before transmitting on any channel, listen to check the channel is not already
in use.
Transmitting
Select the desired channel. Press the PTT button on the microphone and speak
normally into the microphone. Hold it approx. 7cm from your mouth. Release the PTT
button to end the transmission and listen for a reply.
Transmitting range
The talk range depends on the environment and terrain, it will be affected by
concrete structures and heavy foliage.
Optimal Range
Outdoors Flat, open
areas
Medium Range
Outdoors Buildings
or trees Also near
residential buildings
Minimal Range Outdoors
Dense foliage or
mountains. Also inside
some buildings