Oricom UHF200 - Manual (Page 16)

16
Operations
Priority Channel
To store a Priority Channel, press the
PRI/LO button. The letter "P" will appear
when the priority channel is set. The channel you selected as your Priority
Channel will then be automatically monitored during the Group Scan.
Note: You can only store one channel as your priority channel.
To store a Priority Channel
1. Select the required channel.
2. Briefly press and hold the
PRI/LO button a loud beep is heard. The letter "P"
appears when the priority channel is set.
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS
CTCSS
CTCSS (Continuous Tone Coded Squelch System)
CTCSS uses a sub-audile tone to open and close the squelch on your radio. This
will allow a number of users to share the same channel without disturbing one
another.
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS
Monitoring the Channel
Monitoring the channel is helpful as it allows you to listen for other CTCSS users
not within your group.
To monitor the channel
Press the
MO/TSQ button. If no signals are present, a hissing noise will indicate
an empty channel.
Press the
MO/TSQ button again to restore to its previous setting.