Oricom UHF200 - Manual (Page 19)

19
Selcall
Selcall or Selective Calling is a function that allows you to selectively call another
radio, using a unique ID number. Your radio has 10 programmable Selcall ID
memories. The ID memories are displayed as "C0 to C9". Here you will program
Selcall ID numbers of other radios.
Your Radio’s Selcall Identification number is preset at "12345".
You must
change this number to your own unique five digit Selcall ID number.
Selcall Identification Name
In addition to the Selcall ID number, each Selcall ID can be named using a 5
character ALPHA name. The ALPHA name is stored in memory along with the
ID code. When an incoming Selcall is received and the Selcall matches one of
those in your radio's memory. The name can be displayed instead of the Selcall
ID number.
Recalling Selcall Idents from Memory
1. Press the
ID/CAL button to select the CALL TO mode.
2. To select the required Identity in memory locations 'C0' to 'C9'. Rotate the
channel knob on the front display of the UHF100. And, for the UHF200 press
the
Channel Up and Channel Down buttons on the microphone.
3. When the required Selcall Memory is displayed, press and hold the ID/CAL
button to send TO.
MO / TSQ ID / CAL PRI / LO SC / MEM F/ DPX
MENU QUIET ALPHA OS / GS
Displaying ALPHA Names
To display the Selcall’s ALPHA Name You must have the radio’s ALPHA display
mode selected.
To select the ALPHA display mode briefly press the
F/DPX button followed by
the ALPHA button. ‘ALPHA’ or ‘NUMER’ will be displayed for 2 seconds below
the channel display to indicate the selected mode.
Operations