Oricom UHF200 - Manual (Page 23)

23
Setting up QUIET Mode
To setup QUIET mode you must first ‘tag’ the channels that you want to stay
quiet, then activate the QUIET mode. Once QUIET mode is activated, the
channels you have tagged will remain quiet to all incoming signals unless your
Selcall Ident is received. Channels not tagged will remain open to all signals and
will operate normally.
1) Select the channel you want to put in "Q" mode using the channel selector.
2) Briefly press
F/DPX and then Quiet button. A beep is heard and the Q icon
appears on the LCD display.
3) While in Q mode condition, when the radio receives a code matching your ID,
it will perform the following opeartions.
• Automatically responds to the caller by transmitting Acknowledge tones.
• Informs you that a caller is on the channel by emitting CALL Alarm and
displays FROM icon.
Menu FUNCTIONS
The MENU feature provides a convenient method of customizing some of the
radio’s functions. The following Menu Options are available. Note that some
items are only available on certain channels.
To access the Menu functions
1. Briefly press the
F/DPX button, then the MENU button. The first Menu
function is displayed.
2. Briefly press the SC/MEM button to cycle through each available function.
After the last function has been selected, the cycle returns to the beginning.
3. Rotate the Channel knob to alter the parameters of the selected function.
4. Briefly press
F/DPX button and then press Menu button to exit and store any
changes.
Operations