Oricom UHF200 - Manual (Page 26)

26
Operations
Duplex Operation
General
Your radio has a Repeater Access function to allow use of local Repeater stations (if
available in your area). Repeaters are shared radio system installed by interested
parties (clubs, local business etc.) that pick transmissions on specific channels
and re-transmit (or repeat) the received signal to another channel.
Cha
nne
l 2
Cha
nne
l 32
Chan
nel 2
Chan
nel 3
2
Repeater Station
The Repeater Access function can be set (from channel 1 to 8) used by local
repeater stations. When activated, your radio will receive the Repeater on its
specific channel (all repeater outputs are on channel 1 to 8) but transmits to the
repeater channel 31 through 38.
e.g.
CH01 on Duplex mode will receive on CH01 but transmit on CH31
CH02 on Duplex mode will receive on CH01 but transmit on CH32.
CH and Number
Simplex mode Transmit/reciever
Frequency (MHz)
Duplex Mode transmit
Frequency(MHz)
1 476.425 477.175 CH31
2 476.450 477.200 CH32
3 476.475 477.225 CH33
4 476.500 477.250 CH34
5 476.525 477.275 CH35
6 476.550 477.300 CH36
7 476.575 477.325 CH37
8 476.600 477.350 CH38