Olympus E-5 User Manual
Page 108
108
EN
Cust
o
m
izi
n
g
your
c
a
mer
a
9
Custom Menu
T RELEASE/j
RLS PRIORITY S/RLS PRIORITY C
Normally, this camera does not release the shutter while the AF is operating or the flash is
charging. If you want to release the shutter without waiting until these operations have
completed, use the setting below. You can set the release priority individually in AF mode.
RLS PRIORITY S
Sets release priority for S-AF mode
gP. 53.
RLS PRIORITY C
Sets release priority for C-AF mode
gP. 54.
O
fps
You can set the number of pictures shot in one second when using sequential shooting with
[O] from [1fps] to [4fps].
Custom Menu
U DISP/
8/PC
HDMI
Set this when the camera is connected to a TV via an HDMI mini-cable.
HDMI OUT
Selecting the digital video signal format for connecting to a TV via an HDMI mini-cable.
[1080i]
Play back in 1080i format.
[720p]
Play back in 720p format.
[480p/576p] Play back in 480p/576p format (when [VIDEO OUT] is set to [PAL], play
back in 576p format).
x
Notes
• When set to [1080i], 1080i format takes priority for HDMI output. However, if this setting does
not match the input setting of the TV, the resolution is changed first to 720p and then to 480p.
For details on changing the input setting of the TV, refer to the TV’s instruction manual.
HDMI CONTROL
When [ON] is selected, the camera can be operated by a TV remote control when it is
connected to the TV via an HDMI mini-cable.
VIDEO OUT
You can select NTSC or PAL according to your TV’s video signal type.
You will need to set this when you want to connect the camera to a TV and play back images
in a foreign country. Make sure the correct video signal type is selected before connecting the
video cable. If you use the wrong video signal type, recorded pictures will not play back
properly on your TV.
TV video signal types in major countries and regions
Check the video signal type before connecting the camera to your TV.
SLEEP
The camera will enter sleep (standby) mode to reduce the drain on the battery if no
operations are performed for the specified period. [OFF] cancels the sleep mode. Pressing a
button such as the shutter button reactivates the camera.
NTSC
North America, Japan, Taiwan, Korea
PAL
European countries, China
s0033_e_00_0_unified.book 108 ページ ２０１０年１１月１６日 火曜日 午後５時２４分