Olympus E-5 - Manual (Page 13)

13
EN
Prep
arat
ions
f
or
sho
oting
Basic guid
e
Power on
OFF
ON
Control panel
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device’s filter surface.
Adjust the viewfinder’s diopter in
accordance with your vision.
While looking through the viewfinder,
rotate the diopter adjustment dial little by
little.
When you can see the AF target clearly,
adjustment is complete.
Adjusting the viewfinder’s
diopter
When the camera is
turned on, the battery
check is displayed on
the control panel.
Viewfinder
Diopter adjustment dial AF target
Lit up (ready for use)
Lit up (battery power is low)
Blinks (charging required)
Turns the control panel light on
and off.
LIGHT button
• To turn off the power, set the power switch to OFF.
1
Set the camera’s power switch to ON
Power switch
s0033_e_00_0_unified.book 13 ページ ２０１０年１１月１６日 火曜日 午後５時２４分