Olympus E-5 - Manual (Page 99)

99
EN
8
Set
u
p function
s
8 Setup functions
Use the Setup Menu to set the basic camera functions. For
details on using the menu lists, see “Setting on the
menu” (
gP. 22).
X (Date/time setting) gP. 14
W (Changing the display language)
You can change the language used for the on-screen display and error messages from
ENGLISH to another language.
s (Monitor brightness adjustment)
You can adjust the brightness and color temperature of the
monitor.
Use
bd to switch between j (color temperature) and k
(brightness), and use ac to adjust the value between
[+7] to [-7].
Setting to [AUTO BRIGHTNESS] allows the illumination
sensor to measure the surrounding brightness and
automatically get the monitor darker for optimal viewing.
REC VIEW
You can display the picture you have just taken on the monitor while it is being recorded to
the card, and to select how long the picture is displayed. This is useful for making a brief
check of the picture you have just taken. Pressing the shutter button halfway while checking
the picture lets you resume shooting immediately.
[1SEC] to [20SEC] Selects the number of seconds to display each picture. Can be set in
units of 1 second.
[OFF] The picture being recorded to the card is not displayed.
[AUTO q] Displays the image being recorded, and then switches to playback
mode. This is useful for erasing a picture after checking it.
cMENU DISPLAY
[OFF] The custom menu is hidden on the menu screen.
[ON] The custom menu is shown on the menu screen.
Setup Menu
X
ON
5SEC
cMENU DISPLAY
ENG. W
FIRMWARE
REC VIEW
s
SET BACK
’10.09 .01
14:01
s
–5 +2
SET BACK
s0033_e_00_0_unified.book 99 ページ ２０１０年１１月１６日 火曜日 午後５時２４分