Olympus E-5 - Manual (Page 113)

113
EN
9
Cust
o
m
izi
n
g
your
c
a
mer
a
Custom Menu X K/ASPECT/COLOR/WB
NOISE REDUCT. (Noise Reduction)
This function reduces the noise that is generated during long exposures. When shooting
night scenes, shutter speeds are slower and noise tends to appear in images. With [NOISE
REDUCT.], you can let the camera reduce noise automatically to produce clearer images.
When set to [AUTO], noise reduction will be activated only when the shutter speed is slow.
When set to [ON], noise reduction will always be activated.
• While noise reduction is activated, it takes about twice the usual time to take a picture.
• The noise-reduction process is activated after shooting.
• During processing the card access lamp blinks. You cannot take more pictures until the
card access lamp turns off.
x
Notes
• During sequential shooting, [NOISE REDUCT.] is [OFF] automatically.
• This function may not work effectively with some shooting conditions or subjects.
NOISE FILTER
You can select the noise processing level. Use [STANDARD] for general use. [HIGH] is
recommended during high sensitivity shooting (High ISO).
WB gP. 66
Select the white balance to suit the light source. Other than custom white balance [CWB],
adjust in the A direction (red - blue) and G direction (green - reddish purple) within the range
[+7] to [-7].
ALL >
You can apply the same compensation value to all the white balance modes at once.
[ALL SET] The same compensation value applies to all WB modes.
[ALL RESET] The WB compensation value settings applied to each WB mode are all
cleared at once.
If you select [ALL SET]
1) Use
bd to select the color direction.
Toward A: Amber-Blue/Toward G: Green-Magenta
2) Use ac to set the compensation value. g“WB compensation” (P. 68)
Releasing the AEL/AFL button takes a sample image. You can check the white balance
you have adjusted.
If you select [ALL RESET]
1) Use
ac to select [YES].
When set to [OFF]
When set to
[ON] or [AUTO]
s0033_e_00_0_unified.book 113 ページ ２０１０年１１月１６日 火曜日 午後５時２４分