Olympus E-5 User Manual

Page 118

Advertising
background image

118

EN

Cust

o

m

izi

n

g

your

c

a

mer

a

9

AF FOCUS ADJ.

You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer,
+: toward )). Normally, there is no need to change this.

[SET AF DATA]

Fine-adjust the AF default value and register the setting. You can also register the
setting according to the lens.
[OFF]

AF focus adjustment is not performed.

[DEFAULT DATA]

Registers and applies all lens AF
adjustment values not registered
individually.

[LENS DATA]

Fine-adjusts the AF for each lens. You
register the adjustment values for up to 20
lenses.

x

Notes

• Depending on the adjustment made, the lens may not focus toward the ) or near side.
• When using a teleconverter, the teleconverter and lens are registered as a set.
• Only Four Thirds lenses can be registered.

[DATA LIST]

This displays the lens information registered with [LENS DATA] from [SET AF
DATA]
. Select a lens from the list, and then check, delete, or edit the registration
information.

To take pictures while slightly changing the AF adjustment value:

j After fine-adjusting the adjustment value, press the shutter button and repeatedly take pictures

before pressing the

i button.

Note the following when taking pictures to check the AF adjustment value.
• It is recommended that the record mode be set to a setting higher than YN when taking

pictures.

• Be careful of camera shake, subject movement, and changes in the distance to the subject

when taking pictures.

• It is recommended that you take a picture of a subject with strong contrast within approximately

3 m (9.8 ft.) in the actual shooting environment (lighting and temperature).

• Avoid taking pictures against backlight.



TIPS

LENS DATA SET

14-54 F2.8-3.5

14-54 F2.8-3.5

S/N 000000000

S/N 000000000

EC00

S/N 888888888

±88

+20

±88

W

T

CANCEL

SET

Use

ac to adjust.

1 12-60 F2.8-4.0

2 14-54 F2.8-3.5

1 14-54 F2.8-3.5

2 12-60 F2.8-4.0
1 50-200 F2.8-3.5

DATA LIST

BACK

SET

When the same lens is registered
multiple times, the adjustment
value for the lens with v is
applied.

Select which lens to use
when the same lens is
registered multiple times.

Select this to check, delete, or edit
the selected lens.

s0033_e_00_0_unified.book 118 ページ 2010年11月16日 火曜日 午後5時24分

Advertising