Quadra-Fire SAPPHIRE-D-CSB - Manual (Page 3)

3 Quadra-Fire • Sapphire • 7055-116 Rev. D • 6/11
Safety Alert Key:
• DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury.
• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Indicates practices which may cause damage to the fi replace or to property.
- TABLE OF CONTENTS -
Section 1: Listing and Code Approvals
A.
Appliance Certifi cations ......................4
B. Glass Specifi cations ............................4
C. BTU Specifi cations ..............................4
D. High Altitude Installations ....................4
E. Non-Combustible Materials .................4
F. Combustible Materials ........................4
G. Requirements for the
Commonwealth of Massachusetts ........5
Section 2: Getting Started
A. Design & Installation
Considerations ....................................6
B. Tools and Supplies Needed................6
C. Inspect Appliance & Components .......6
Section 3: Appliance Location & Clearances
A. Selecting Appliance Location..............7
B. Clearances to Combustibles ...............7
Section 4: Termination Locations
A. Vent Termination Minimum
Clearances..........................................8
Section 5: Vent Information
A.
Venting Components ..........................10
B. Use of Elbows .....................................10
C. Measuring Standards ..........................10
D. How to Use the Vent Graph ................11
E. Venting Guidelines ..............................11
F. Horizontal Termination ........................12
G. Vertical Termination ............................15
Section 6: Gas Information
A.
Fuel Conversions ................................23
B. Gas Pressures ....................................25
C. Gas Connection.. ................................25
Section 7: Electrical Information
A. Recommendation for Wire ..................27
B. Connecting to the Appliance ...............27
C. Standing Pilot Ignition System Wiring ..28
Section 8: Appliance Setup
A. Remove Shipping Materials ................29
B. Accessories .........................................29
C. Top to Rear Conversion ......................29
D. Baffl e Installation/Adjustment ..............30
E. Leg Leveling System ...........................30
F. Brick Installation ..................................30
G. Positioning the Logs ............................31
H. Mineral
Wool .......................................31
I. Embers ................................................31
J. Glass Door Assembly .........................32
K. Optional Blower Installation ................32
L. Intake Fuel Restrictor Adjustment .......34
M. Shutter Adjustment .............................34
Section 9: Operating Instructions
A. Before Lighting Appliance ...................35
B. Controls ...............................................35
C. Lighting Appliance ...............................36
D. After Appliance is Lit ...........................37
E. Frequently Asked Questions ...............37
Section 10: Troubleshooting ...............................38
Section 11: Maintaining & Servicing Appliance
A. Maintenance Tasks ..............................41
Section 12: Reference Materials
A. Appliance Dimension Diagram ...........42
B. Vent Components Diagram ................43
C. Vent Components List ........................44
D. Service Parts List ................................46
E. Limited LifetimeWarranty ....................50
F. Contact Information ............................52
