Intro check – Teac W-865R User Manual

Page 15

Advertising
background image

ENGLISH

15

Intro Check

Intro Check plays the first 15 seconds of each song, allowing you
to quickly find the song you are looking for.

Press the INTRO CHECK button during playback or stop. The
tape will fast wind in the same direction as playback. When you
find the desired song, press the INTRO CHECK button again to
start playback.

The Intro Check range varies depending on REV MODE switch
settings:

u

: Checks one side of the tape

j

: Checks both sides of the tape

p

: Checks both sides of tape then double checks the first side

(side “A” w side “B” w side “A” if Intro Check is started
on the tape’s forward side (facing you); or side “B” w side
“A” w side “B” if Intro Check is started on the tape’s
reverse side (facing away)

The tape automatically stops upon completion of the check
operation.

<

Make sure that the TAPE I compartment is empty when
starting Intro Check on TAPE II.

<

The tape counter reports how many songs have been intro-
checked so far.

<

Activating the Intro Check function during normal playback
will cause it to skip to the next song: playback of the current
song is interrupted midway.

<

The Intro Check function may not work properly if blanks
between songs are less than 4 seconds long or contain noise.

Advertising