Basic operation, Answering a call, Out of range – Toshiba SG-1800 User Manual
Page 19: Call waiting
BASIC OPERATION
19
Basics
ANSWERING A CALL
1
When a call is received, the phone rings and
the LCD displays as shown.
2
Press
to connect.
“Talk” and the volume setting appears on the
LCD.
3
To hang up, press
or place the handset
on the base unit.
OUT OF RANGE
During a call, as you begin to move too far from the base unit, you first
hear a clicking sound. As you travel farther, the noise increases.
Then, you should move close to the base unit. If you travel out-of-
range, your call terminates.
CALL WAITING
To use this feature, you must subscribe to the Call Waiting Service.
1
When you hear a call-waiting tone while you are already talking on
the phone, simply press
.
2
To take the original call back, press
again.
NOTE:
Pressing
without receiving a Call Waiting signal may disconnect the
current caller.
FLASH
FLASH
FLASH
TALK
TALK
Talk 0:00
<High>
Incoming call
12:35
TALK
*SG-1800.qx 7/11/0 7:03 PM Page 19