Toshiba SG-1800 - Manual (Page 21)

BASIC OPERATION
21
Basics
3 NUMBER REDIAL
To redial any of the last three numbers dialed from the handset (up to
32 digits):
1
Press during standby mode.
The last dialed number (Redial 1) appears on the LCD. Each
press of
will display one of the three numbers dialed.
2
Press when the desired number is displayed.
SENDING THE TONE SIGNAL
Even if you have PULSE service (the TONE/PULSE switch is set to
pulse), you can use this phone with banking and other phone services
requiring touch tone signals.
1
Dial the service number and wait for the connection.
2
Press , then enter the numbers required.
You will hear the tones on the line.
TONE/
TALK
RDL/P
RDL/P
TONE/
RDL/P
TALK
*SG-1800.qx 7/11/0 7:03 PM Page 21