Toshiba SG-1800 - Manual (Page 33)

33
Caller ID/Call waiting
CALLER ID/CALL WAITING
STORING TO SPEED DIAL MEMORY
1
Pick up the handset and press . Then, press or
to bring up the number you wish to store into Speed Dial
memory.
2
Press .
The LCD displays the following screen.
3
Enter a two-digit number (01-20) or press , to select
memory location.
4
Press . A confirmation beep sounds and the Caller ID data
is stored. Press to return to standby mode.
If you select a memory location which is already stored:
(1) The LCD displays the following prompt:
(2) Press to select and press
.
A confirmation beep sounds and the new data overwrites the
old data. The LCD returns to the Caller ID display screen.
If you select :
The LCD returns to the Caller ID display screen.
Press
to return to standby mode. CID
SELECT
CID
SELECT
MEM
CID
Select Location
01s
s
02
Replace Memory?
Yes
s sNo
Wall mount template
IMPORTANT:
Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate a stud for
maximum support of your telephone.
Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
CUT CUT
•
•
*SG-1800.qx 7/11/0 7:04 PM Page 33