Hose covering, Rear stow lynx hose routing, Assembly – Tiger Products Co., Ltd JOHN DEERE 5093E User Manual
Page 45
ASSEMBLY
Assembly Section 2-13
REAR STOW LYNX HOSE ROUTING
WARNING NOTE:
The sudden release of hydraulic pressure could cause the sudden
movement of very heavy parts. Anyone in the way of these parts could be severely hurt
or killed. DO NOT ALLOW these hydraulic hoses to BREAK or BURST in order to
prevent hydraulic failure Make sure the hoses do not pinch or stretch as boom moves.
Measure TWICE, check TWICE then proceed with caution.
HOSE COVERING
Secure hoses together with zip ties wherever loose. Wrap the hoses between the swivel and
main boom with the hose cover provided. Wrap the hoses between the main boom and
secondary boom with the hose cover provided. Where hoses may contact the frame or other
edges, wrap with split hose and secure with hose clamps or zip ties.
On non cab units, the pressure and return hoses from the control valve will also need to be
routed inside the protective clear hose wrap. Cover the valve, valve fittings with the yellow hose
cover and secure with black string provided.
(ASM-C-0058)