Toshiba TEC MA-1350-1 - Manual (Page 51)

- 44 -
EO1-11126
MA-1350-1 SERIES
3. If the “SLIP” lamp flickers during registrations, it indicates that the last item just entered has
been programmed to require validation print. In this case, no other operations can follow until
the validation print of the item is performed.
4. The following options are selective in relation to validation print:
1) Print Format
a) Consecutive No. Print/Non-print
b) Cashier No. Print/Non-print
2) Number of times for validation print of the same item Single-validation (only
once allowed), or Multi-validation (any number of times allowed)
3) Validation Print Content after each non-cash media tender
4) Validation Counter on the Financial Report Print/Non-print
5) Validation Compulsory status on the following keys:
[AT/TL], [CHECK TEND], [chg], [MISC], [CPN], [FS TL TEND], [TRF],
[VND CPN], [STR CPN], [RTN MDSE], [PO], [R/A], [ITEM CORR], [VOID],
[DOLL DISC], [%-], Negative Departments and PLUs.
For details, ask your TOSHIBA TEC representative.
Validation Print
-- Receipt Print --
DP06 500.00
CASH 500.00
JONES 0224 13:57TM
11-28-1997 1CL 0224 DP06 500.00
Date Receipt Department Amount
(Month-Day-Year) Consecutive No. No.
Cashier No.
→
11-28-1997 1CL 0224 CASH 500.00
Media Sale Total or
Tendered Amount
→
Remote Slip Printer (hardware option) Operation
The TEC Remote Slip Printer DRS-207 may be connected to the MA-1350-1 series ECR as an optional de-
vice. The Remote Slip Printer will operate printing if a slip is properly inserted, regardless of the Mode Lock
position (except that no print will occur in the “SET” mode or during program verification in the “X” mode).
1. The remote slip printer will automatically activate printing when the slip has properly been set to the printer
table.
2. The gap of the slip inlet is usually opened, and the slip may be inserted or withdrawn freely outside a
receipt/journal print sequence.
When a slip is properly set to the remote slip printer and the ECR is operated, the gap will be closed and
printing will be performed. When the sale is finalized and the receipt is issued, the gap of the DRS-207 will
be opened to allow the slip withdrawal. (The gap keeps closed during sale item entries.)
3. The RELEASE key on the DRS-207 may be used to open the closed gap in order to withdraw the slip and
skip unnecessary item printer is in a printing action.
4. Printing on the remote slip will be performed alternately with printing on the receipt/journal of the ECR.