Plu preset-code key setting – Toshiba TEC MA-1350-1 User Manual
Page 99
- 33 -
EO1-11126
MA-1350-1 SERIES
NOTES:
1. If the PLU Code entry is skipped and a [KEY] is simply depressed in the above sequence,
the preprogrammed PLU Code of the KEY will be displayed.
2. If “0” is entered as PLU Code in the above sequence, the KEY will be closed. Pressing the
closed KEY in sale entry will cause an error.
PLU Preset-code Key Program Receipt Format:
Key Operation: Control Lock: SET
7
When there are any keys programmed as PLU Preset-code Keys on the ECR Keyboard, and/or when the
PLU Keyboard PK-2 (hardware option) is connected to the ECR, a PLU code may be preset to each of those
keys in this operation.
Condition: Any time outside a sale
Programming Procedure:
AT/TL
Repeatable for other keys.
PLU Code
Enter through Numeric
Keys on the ECR Keyboard
(Enter 0 to close the key)
2
@/FOR
Declaration of Program
No. 27 for PLU Preset-
code Key Setting
KEY
Location Code (left side);
refer to REMARKS 1 and
2 on the next page.
PLU Code assigned to
the key (right side)
Required
Key
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-28-1997 #0
P27
#116 0500
0089 12:11TM
7
@/FOR
0
0
AT/TL
5
2
PLU Code