Toshiba S2E21 - Manual (Page 34)

TOSHIBA
5.9 Testing
I
M-1
1
Testing
Input
T E S T I N G
RESET
S P A R E 1
S P A R E 2
A T D 4
( 4 - 2
Description
Perform tests on the input/output circuit.
Displays the state of contact input from the
terminal block.
Displays when there is an input: and
Displays 0 when there is no input.
The 3-phase input and zero-phase input are
checked with the current value displayed on P2.
at
I
81