Toshiba S2E21 - Manual (Page 40)

TOSHIBA
Procedure for loading the backed-up settings of the memory card into the
1. Register the MACH. ID and PASS ID of the
(MACH. ID and PASS ID must be the same as those when the settings were
backed up in the memory card.)
(See 5.3.3. 5.4.)
2. Insert the memory card into the
(See 5.11.3
3. Load the backed-up contents from the memory card into the
The contents of settings backed up by the memory card are those stored by the
above backup procedure.
After this, when the settings of the are changed,
the contents of the memory card do not automatically change. You are reguired
to perform the store operation again.
Prior to the loading of the backed-up settings, comparison is made of the
MACH. ID and PASS ID between the memory card and the When these ID
numbers do not agree, the backed-up settings will not be loaded into the
5.11.2 Memory Card As Information Media
The memory card may be used as information media for the monitor system including
personal computers and for the
For detail, see the manual for the monitor system.
87