Toshiba S2E21 - Manual (Page 50)

T O S H I B A
or
Or
On
On
Phenomenon
indicates
LCD indicator
PO
Second cannot
be set.
P2
The
does not
change while
the metered
value changes.
R remains
0.
UB remains
0.
P3
999 is
displayed.
P 4
I s t
and
T t
remain at 0.
Check point
LED is lit.
LED is not
lit.
lower part of
P2
is indicated.
on
'25 is 0 (OFF).
on
'23 is 0 (OFF).
item measured
n the temperature
between
has not been
more than
times. and
earned function is
Possible cause
Setting value is
Normal.
Normal.
The page is being
turned.
Normal. Change value from
Normal. Change value from
Cable is
bad.
Normal.
#hat to do
Press the [EXE] key
and enter all setting
values again. (NOTE)
Display other pages.
(See Section 5.3.1.)
The second setting
is not provided.
Press the key
change to the display
mode.
Firmly connect cable
and connector.
The measured value is
displayed after the
motor is started five
times.
NOTE: Pressing the [EXE] key returns the setting to those values set at time
of delivery.
97