Connecting a dvd player with colorstream, Component video), a vcr, and a satellite receiver – Toshiba 37AV52U User Manual

Page 15

Advertising
background image

Chapter 2: Connecting your TV

1

Connecting a DVD player with ColorStream

®

(component video), a VCR,

and a satellite receiver

Your TV has two sets of ColorStream

®

(component video) inputs.

You will need:

coaxial cables
standard A/V cables

For better picture performance, if your VCR has S-video,

use an S-video cable (plus the audio cables) instead of

the standard video cable. Do not connect both types of

video cable to

VIDEO 1

at the same time or the picture

performance will be unacceptable.
If you have a mono VCR, connect

L/MONO

on the TV

to your VCR’s audio out terminal using the white audio

cable only.

standard audio cables
component video cables

You can connect the component video cables (plus

audio cables) from the DVD player or satellite receiver to

either set of

ColorStream

terminals on the TV (

HD-1

or

HD-2

). The

ColorStream HD-1

and

HD-2

terminals can

be used with Progressive (480p, 720p) and Interlaced

(480i, 1080i) scan systems. A 1080i signal will provide

the best picture performance (1080p is not supported).
If your DVD player or satellite receiver does not have

component video, connect a standard A/V cable to

VIDEO 2

on the side panel. If your DVD player has HDMI

video, see page 17.

To view antenna or Cable channels:

Select the

ANT/CABLE video input source on the TV.*

To view the DVD player:

Turn ON the DVD player. Select the

ColorStream HD-1 video

input source on the TV.*



To view satellite programs using the component
video connections:

Turn on the satellite receiver. Select the

ColorStream HD-2

video input source on the TV.*

To view the VCR or view and record antenna
channels:

Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the

VIDEO 1 video input source on the TV.*

To record a TV program while watching a DVD:

Turn ON the VCR. Tune the VCR to the channel to record.
Select the

ColorStream HD-1 video input source on the TV* to

view the DVD.

To select the video input source, press INPUT on the remote control

( page 21). To program the TV remote control to operate other

devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of television

programs, videotapes, DVDs, and other materials is prohibited under the

Copyright Laws of the United States and other countries, and may subject

you to civil and criminal liability.

*

Advertising