Toshiba 37AV52U - Manual (Page 18)

Chapter 2: Connecting your TV
18
Connecting a digital audio system
The TV’s
DIGITAL AUDIO OUT terminal outputs a Dolby ® *
Digital or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby ® Digital
decoder or other external audio system with optical audio
input.
You will need:
optical audio cable (Use an optical audio cable that has
the larger “TosLink” connector and not the smaller “mini-
optical” connector.)
To control the audio:
Turn on the TV and the digital audio device.
Press on the TV’s remote control and open the
Audio
menu
.
Highlight
Audio Setup and press .
In the
Optical Output Format field, select either Dolby
Digital or PCM, depending on your device (“Selecting
the optical audio output format” on page 44).
Done
Audio Setup
Language
Reset
o e r e t S S T M
English
Dolby Digital Optical Output Format
HDMI 1 Audio
o N o i d u A C P
Auto
Dynamic Range Control
Compressed
Dolby Digital
•
1�
�
�
�
Note:
Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are
not compatible with standard optical out signals may
not work properly, creating a high noise level that may
damage speakers or headphones. THIS DAMAGE IS NOT
COVERED BY YOUR WARRANTY.
The
DIGITAL AUDIO OUT
terminal may not output some
digital audio sources because of copy restrictions.
Manufactured under license from Dolby Laboratories. Dolby and
the double-D symbol are trademarks of Dolby Laboratories.
Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.
You will need:
standard audio cables
To control the audio:
Turn on the TV and the stereo amplifier.
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the TV’s
volume control or the amplifier’s volume control.
Menu item of Speakers can turn to OFF to mute the TV’s
built in speakers.
•
•
*
•
1�
�
�