Toshiba 37AV52U - Manual (Page 43)

Chapter 6: Using the TV’s features

Adjusting the audio
Muting the sound
Press on the remote control to partially reduce (1/2 MUTE)
or turn off (MUTE) the sound. Each time you press , the
mute mode will change in the following order:
1/2 Mute Mute Volume
If the closed caption mode is set to
Off when you select
“MUTE” mode, the closed caption feature is automatically
activated if the TV program is Closed Captioned. To mute
the audio without automatically activating the closed caption
feature, use
to set the volume to 0. See “Using the closed
caption mode” ( page 42) for more information on closed
caption modes.
Using the digital audio selector
You can use the
Digital Audio Selector to conveniently switch
between audio tracks on a digital channel (for those channels
that have multiple audio tracks). This temporarily overrides
the audio track chosen by the language option under
Audio
Setup ( “Selecting stereo/SAP broadcasts” on page 43).
To use the digital audio selector:
Press and open the
Audio menu.
Highlight
Digital Audio Selector and press .
Press p or q to select
Audio, and then press t or u to
select the desired service.
Press .
1�
�
�
�
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears on-screen when
is pressed.
The MTS feature is only available for analog signals on the
ANT/CABLE input.
To listen to stereo sound:
Press and open the
Audio menu.
Highlight
Audio Setup and press .
In the
MTS field, select Stereo.
To save the new settings, highlight
Done and press .
To reset the settings to the factory defaults, highlight
Reset and press .
Note:
You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
If the stereo sound is noisy, select
Mono
to reduce the
noise.
To listen to an alternate language on an ATSC digital
station (if available):
Highlight the
Language field in step 3 above, and then press
t or u to select the language you prefer.
To listen to a second audio program on an analog
station (if available):
Select
SAP in step 3 above.
Note:
A second audio program (SAP) can be heard only on
those TV stations that offer it. For example, a station might
broadcast another language as a second audio program.
If you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
If you have SAP on and the station you are watching is
not broadcasting a second audio program, the station’s
normal audio will be output. However, occasionally there is
no sound at all in
SAP
mode. If this happens, set the
MTS
feature to Stereo mode.
1�
�
�
�
•
•
•
•