Toshiba 37AV52U - Manual (Page 40)

Chapter 6: Using the TV’s features
40
Scrolling the TheaterWide ® picture
(TheaterWide 2 and 3 only)
You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.
To set the scroll settings:
Press and open the
Video menu.
Highlight
Theater Settings and press .
In the
Picture Size field, select either TheaterWide 2 or
TheaterWide 3 (you cannot scroll in any other mode).
Press
 to highlight the
Picture Scroll field.
Press  or  to scroll the picture up and down as needed.
To save the new settings, highlight
Done and press .
To revert to the factory defaults, highlight
Reset and press
.
Note:
When receiving a signal at 480i resolution, the picture
scroll function may have limited adjustment range.
Using the auto aspect ratio feature
When the auto aspect ratio feature is set to
On, the TV
will automatically select the picture size when one of the
following input sources is received:
A 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE
input
A 480i signal from the
VIDEO 1 or VIDEO 2 input
A 480i signal from the
ColorStream HD1, or HD2 input
A 480i, 480p, 720p, 1080i, or VGA (60Hz) signal from the
HDMI 1/2 input
Aspect ratio of
signal source
Automatic aspect size (automatically
selected when Auto Aspect is On)
4:3 normal Natural (with sidebars)
4:3 letter box TheaterWide 2
16:9 full Full
Not defined
(no ID-1 data
or HDMI
aspect data)
The current picture size you set under
“Selecting the picture size” on page 39.
Note:
The auto aspect ratio feature is not applicable to PC
input.
1�
2�
3�
4�
5�
6�
•
•
•
•
To turn on the auto aspect ratio feature:
Press and open the
Video menu.
Highlight
Theater Settings and press .
In the
Auto Aspect Ratio field, select On.
To save the new settings, highlight
Done and press .
To revert to the factory defaults, highlight
Reset and
press .
To turn off the auto aspect ratio feature:
Select
Off in step 3 above.
Selecting the cinema mode
When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the
VIDEO 1, VIDEO 2, ColorStream HD-1,
ColorStream HD-2 (component video), or HDMI inputs on the
TV, smoother motion can be obtained by setting the
Cinema
Mode to Film.
To set the Cinema Mode to Film:
(available for 480i and 1080i signals)
Press and open the
Video menu.
Highlight
Theater Settings and press .
In the
Cinema Mode field, select Film.
To save the new settings, highlight
Done and press .
To revert to the factory defaults, highlight
Reset and
press .
To set the Cinema Mode to Video:
Select
Video in step 3 above.
Using the FREEZE feature
To use the FREEZE feature:
When viewing the TV, press to make the picture a
still picture.
To return to the moving picture, press again (or any
other button).
Note: If the TV is left in FREEZE mode for more than 15
minutes, the FREEZE mode will automatically be released
and the TV will return to moving picture.
Using the FREEZE function for any purpose other than your
private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.
1�
2�
3�
4�
1�
2�
3�
4�
1�
2�