Toshiba 26AV502RZ - Manual (Page 11)

11
Chapter 1: Introduction
7無 MENU (ENTER) — Press to access the
menu system ( pages 27–28). When a
menu is on-screen, the MENU button on the
TV’s control panel functions as the ENTER
button.
8無 EXIT — Press to instantly close an on-
screen menu.
9無 CHANNEL pq — When no menu is on-
screen, these buttons change the channel
(programmed channels only;  page 30).
10無 VOLUME tu — These buttons adjust the
volume level.
11無 INPUT — Repeatedly press to change
the source you are viewing ( ANT/CABLE,
VIDEO 1, VIDEO 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, PC).
TV front and side panel controls and connections
Model 32AV502RZ is used in this manual for illustration purposes.
1 2
6
7
5
8
10
9
11
3
4
Control panel
TV front Left side panel
1無 Green LED
Power LED (Green) = Power indicator
2無 Remote sensor — Point the remote control
toward this remote sensor ( “Remote
control effective range” on page 20).
3無 VIDEO-2 IN — The side panel A/V
connections are referred to as “ VIDEO 2”
and include standard A/V connections.
4無 Service port — For service use only. Used
for updating the television’s firmware.
5無 POWER — Press to turn the TV on and off.
If the TV stops responding to the controls
on the remote control or TV control panel
and you cannot turn off the TV, press and
hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
6無 ARROWS pqtu — When a menu is on-
screen, these buttons function as up/down/
left/right menu navigation buttons.