Toshiba 26AV502RZ - Manual (Page 54)

54
Chapter 7: Using the TV’s advanced features
Using CableClear ® digital noise
reduction
The CableClear ® digital noise reduction feature
allows you to reduce visible interference in your
TV picture. This may be useful when receiving a
broadcast with a weak signal (especially a Cable
channel) or playing a noisy video cassette or disc.
To change the CableClear settings:
1無
Press and open the Video menu, highlight
Noise Reduction and press .
2無
In the CableClear field, select your desired setting.
Note :
• If the current input is ANT/CABLE, VIDEO 1,
or VIDEO 2, the menu will display the text
“CableClear.” The available selections are Off,
Low , Middle, and High.
• If the current input is ColorStream HD1,
ColorStream HD2 , HDMI 1, or HDMI 2,
the menu will display the text “DNR.” The
available selections are Off, Low, Middle,
and High. Low, Middle, and High will
reduce the noise in varying degrees, from
lowest to highest, respectively.
3無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
Using MPEG noise reduction
The MPEG noise reduction feature allows you
to reduce visible interference caused by MPEG
compression. Choices for MPEG noise reduction
are
Off, Low, Middle, and High. Off is automatically
selected when this feature is disabled (“grayed out”).
To select the MPEG noise reduction level:
1無
Press and open the Video menu.
2無
Highlight Noise Reduction and press .
3無
Press p or q to highlight the MPEG Noise
Reduction field, and then press t or u to select
either Off, Low, Middle or High.
4無
To save the new settings, highlight Done and press
. To revert to the factory defaults, highlight
Reset and press .
Using the Game Mode feature
You can use the Game Mode feature for shorter frame
delays when playing a video game requiring split-
second timing between the on-screen display and input
from the controller (such as music creation and high-
action games).
This feature is more effective for 480i and 1080i input
signals.
Note:
To use the Game Mode feature, the
current video input must be Video 1, Video 2,
ColorStream HD1 , ColorStream HD2, HDMI 1,
or HDMI 2. The Game Mode cannot be turned
on when any other video input is selected.
To turn on Game Mode:
1無
Press and open the Video menu.
2無
Press p or q to highlight the Game Mode and
then press u .
3無
Press p or q to select On and then press .
To turn off Game Mode:
Select Off in step 2 above, change the video input, or
turn the TV off and then on again.
Note:
You can change the video input by pressing
on the remote control ( page 34).