Chapter 3: using the remote control, Preparing the remote control for use, Installing the remote control batteries 1無 – Toshiba 26AV502RZ User Manual

Page 20: Remote control effective range

Advertising
background image

20

Preparing the remote control for

use

Your TV remote control can operate your TV and
many other devices such as cable converter boxes,
satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even if they are different
brands.

If you have a Toshiba device:

Your TV remote control is preprogrammed to operate
most Toshiba devices ( page 24).

If you have a non-Toshiba device or a
Toshiba device that the remote control is not
preprogrammed to operate:

You can program the TV remote control so it will
operate the other device ( pages 22–26).

Installing the remote control

batteries
1無

Remove the battery cover from the back of the
remote control.

Squeeze tab
and lift cover.

2無

Install two “AAA” size batteries, making sure to
match the + and – signs on the batteries to the
signs on the battery compartment.

3無

Reinsert the battery cover in the remote control
until the tab snaps.

Caution:

Batteries must not be exposed to

excessive heat such as sunshine, fire or the like.

Note:

Be sure to use AAA size batteries.

Dispose of batteries in a designated disposal

area.

Batteries should always be disposed of with

the environment in mind. Always dispose of

batteries in accordance with applicable laws

and regulations.

If the remote control does not operate

correctly, or if the operating range becomes

reduced, replace batteries with new ones.

When necessary to replace batteries in the

remote control, always replace both batteries

with new ones. Never mix battery types or

use new and used batteries in combination.

Always remove batteries from the remote

control if they are dead or if the remote

control is not to be used for an extended

period of time. This will prevent battery acid

from leaking into the battery compartment.

Remote control effective range

For optimum performance, aim the remote control
directly at the TV and make sure there is no
obstruction between the remote control and the TV.

Point remote control
toward remote sensor
on front of TV.

Chapter 3: Using the remote control

Advertising
This manual is related to the following products: