Toshiba 26AV502RZ - Manual (Page 18)

18
Chapter 2: Connecting your TV
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a
Dolby ® * Digital or 2-channel down-mixed
PCM (pulse-code modulation) signal for use with
an external Dolby
® Digital decoder or other external
audio system with optical audio input.
You will need:
•
optical audio cable (Use an optical audio cable
that has the larger “TosLink” connector and not
the smaller “mini-optical” connector.)
Dolby Digital decoder or
other digital audio system
TV back panel
To control the audio:
1無
Turn on the TV and the digital audio device.
2無
Press on the TV’s remote control and open the
Audio menu.
3無
Highlight Audio Setup and press .
4無
In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device (“Selecting
the optical audio output format” on page 44).
Done
Audio Setup
Language
Reset
o e r e t S S T M
English
Dolby Digital Optical Output Format
HDMI 1 Audio
o N o i d u A C P
Auto
Dynamic Range Control
Compressed
Dolby Digital
Note:
• Some audio systems may not be compatible
with Dolby Digital bitstream signals. Older
audio systems that are not compatible with
standard optical out signals may not work
properly, creating a high noise level that
may damage speakers or headphones.
THIS DAMAGE IS NOT COVERED BY YOUR
WARRANTY.
• The DIGITAL AUDIO OUT terminal may not
output some digital audio sources because
of copy restrictions.
* Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Connecting an audio system
This connection allows you to use external speakers with
an external analog audio amplifier to adjust the sound level.
You will need:
•
standard audio cables
LINE IN
L R
Analog audio amplifier
TV back panel
To control the audio:
1無
Turn on the TV and the stereo amplifier.
2無
Set up a optimum volume level of the stereo amplifier.
Then you can adjust the sound volume level from the
TV’s volume control or the amplifier’s volume control.
3無
Menu item of Speakers can turn to OFF to mute
the TV’s built in speakers.