Toshiba MK6017MAP - Manual (Page 126)

360014937
Copyright ©2000 Toshiba corporation. All rights reserved.
- 626 -
11.6 Other timings
See HOST INTERFACE section for timings which are not shown here.
Function and Intervals Timeout
•
POWER ON TIMINGS
From power on to BSY=1 400 ns maximum
From Power on to BSY=0, DRDY=1 31 s maximum
•
SOFT RESET TIMINGS
From soft reset assertion (SRST=1) to BSY=1 400 ns maximum
From soft reset negation (SRST=0) to drive ready (BSY=0, DRDY=1) 10 sec maximum
•
HARD RESET TIMINGS
From hard reset assertion to BSY=1 400 ns maximum
From hard reset negation to drive ready (BSY=0, DRDY=1) 31 sec maximum
•
DATA IN COMMANDS
From writing to command register to BSY=1 400 ns maximum
From BSY=1 to BSY=0, DRQ=1, INTRQ set (When the drive is in idle mode) 20 sec maximum
From BSY=1 to BSY=0, DRQ=1, INTRQ set (When the drive is in standby mode) 35 sec maximum
Drive Busy during data transfer 5
µ
s minimum
•
DATA OUT COMMANDS
From writing to command register to BSY=1 400 ns maximum
From BSY=1 to BSY=0, DRQ=1 400 ns maximum
Drive Busy during data transfer 5
µ
s minimum
From BSY=1 to INTRQ set (When the drive is in idle mode) 10 sec maximum
From BSY=1 to INTRQ set (When the drive is in standby mode) 25 sec maximum
•
NON-DATA COMMANDS
From writing to command register to BSY=1 400 ns maximum
From BSY=1 to INTRQ set (When the drive is in standby mode) 17 sec maximum
•
DMA DATA TRANSFER COMMANDS
From writing to command register to BSY=1 400 ns maximum
Table 11.6-1 Other timings.