Toshiba MK6017MAP - Manual (Page 29)

360014937
Copyright © 2000 Toshiba corporation. All rights reserved.
- 529 -
10.3.2 Pin Assignment
The following table describes all of the pins on the Task File Interface.
Table 10.3-1 Signal pin assignment
PIN No. SIGNALS PIN No. SIGNALS
1 - RESET 2 GROUND
3 DD 7 4 DD 8
5 DD 6 6 DD 9
7 DD 5 8 DD 10
9 DD 4 10 DD 11
11 DD 3 12 DD 12
13 DD 2 14 DD 13
15 DD 1 16 DD 14
17 DD 0 18 DD 15
19 GROUND 20 KEY
21 DMARQ 22 GROUND
23 - DIOW 24 GROUND
STOP
25 -DIOR 26 GROUND
-DMARDY
HSTROBE
27 IORDY 28 CSEL
-DMARDY
-DSTROBE
29 -DMACK 30 GROUND
31 INTRQ 32 - IOCS16
33 DA 1 34 - PDIAG -CBLID
35 DA 0 36 DA 2
37 - CS0 38 - CS1
39 - DASP 40 GROUND
41 + 5V (LOGIC) 42 + 5V (MOTOR)
43 GROUND 44 RESERVED
Note) Symbol (-) in front of signal name shows negative logic.