Toshiba MK6017MAP User Manual
Page 76
360014937
Copyright ©2000 Toshiba corporation. All rights reserved.
- 576 -
Table 10.8-3 Identify Information (Continued)
WORD
DESCRIPTION
Hex.
83 Command
set
supported.
0000h or FFFFh = command set notification not supported
15 0 (Fixed)
14 1 (Fixed)
13-9 Reserved
8 1=Set MAX security extension supported
7 Reserved
6 1=SET FEATURES subcommand required to spin up after power-up
5 1=Power-Up in Standby feature set supported
4 1=Removable Media Status Notification feature set supported
3 1=Advanced Power Management feature set supported
2 1=CFA feature set supported
1 1=READ / WRITE DMA QUEUED supported
0 1=DOWNLOAD MICROCODE command supported
4108
84
Command set/feature supported extension
15 0 (Fixed)
14 1 (Fixed)
13-0 Reserved
4000
85 Command
set/feature
enabled
15 Reserved
14 1=NOP command supported
13 1=READ BUFFER command supported
12 1=WRITE BUFFER command supported
11 1=WRITE VERIFY command supported
10 1=Host Protected Area feature set supported
9 1=DEVICE RESET command supported
8 1=SERVICE interrupt enabled
7 1=release interrupt enabled
6 1=look -ahead enabled
5 1=write cache enabled
4 1=supports PACKET Command feature set
3 1=supports power management feature set
2 1=supports removable feature set
1 1=Security feature set enabled
0 1=SMART feature enabled
XXXX
86 Command
set/feature
enabled
15-9 Reserved
8
1=SET MAX security extension enabled by SET MAX SET
PASSWORD
7 Reserved
6 1=SET FEATURES subcommand required to spin-up after power-up
5 1=Power-Up In Standby feature set enabled
4 1=Removable Media Status Notification feature set enabled
3 1=Advanced Power Management feature set enabled
2 1=CFA feature set supported
1 1=READ / WRITE DMA QUEUED supported
0 1=DOWNLOAD MICROCODE command supported
0X0X
87 Command
set/feature
default
15 0 (Fixed)
14 1 (Fixed)
13-0 Reserved
4000
88
15-8 Ultra DMA transfer mode selected
7-0 Ultra DMA transfer modes supported
XX1F
89
Time required for security erase unit completion
00XX
90 Reserved
0000
91
Current Advanced Power Management setting
15-8 Reserved
7-0 Current Advanced Power Management setting
set by Set Features Command
00XX