Ultra electronic MAGICARD Sicura Laminator User Manual
Page 10
Advertising
Quick Start Guide
Ultra Electronics Card Systems
Page 10
MAGICARD Sicura Laminator
The temperature will achieve the set
point level after a delay of 4 minutes,
and the READY indicator will illuminate.
Notes:
1. When switched on, the laminating
roller and take-up roll turn for
30 seconds or until a black
alignment panel is found by the
optical sensor.
2. The Ready LED will flash for
4 minutes until the roller has heated
up, cards cannot be fed in until
then.
3. Opening the roller lever will stop all
card/film movement. Closing the
lever performs a Reset function but
without the 4 minutes delay.
Advertising